Uncompromising. UHD.

Titan XR
Series

/ The Engineering

UHD precision.
Zero compromise.

Low Brightness, High Greyscale

The Titan XR cabinet has the ability to project high levels of grey while maintaining low brightness — a technically demanding achievement that standard LED display cabinets cannot reach. Pledco's advanced software, control system and calibration enables pristine imagery across the full greyscale range, even when the display is dimmed. Critical for broadcast environments, executive briefing centres and control rooms where operators view the display for extended periods.

20-bit Greyscale Low Brightness Mode Advanced Calibration Proprietary Software
HD Broadcast Compatible

The Titan XR is HD broadcast compatible for live television recording. Ultra-high refresh rates above 4,800Hz using MSB/LSB grey scale and Pledco's proprietary cross-scanning technology ensure the display is completely flicker-free when captured on camera. All Titan XR cabinets are equipped with full data redundancy to ensure zero downtime during live events — a hard requirement for broadcasting environments where content interruption is not acceptable.

>4,800Hz Refresh HD Broadcast Ready Full Data Redundancy Zero Live Downtime
/ Engineering

Built for
premium installations.

01
Full Data Redundancy

Complete redundant data line architecture ensures zero display downtime during operating time. If a data connection fails during a live event, the backup path activates immediately — no content interruption, no operator intervention required.

02
Hot-Swappable Dual PSU

Equipped with dual independent power supplies and a dynamic load sharing system. If one PSU fails, the second takes full load instantly — the show continues. PSUs are hot-swappable and can be replaced without powering down the display.

03
Real-Time Monitoring

The system monitors and auto-adjusts temperature, voltage, power consumption, data signal integrity and many other parameters in real time. Anomalies trigger immediate notifications. Maintenance can be scheduled before any visible impact on the display.

04
Pixel Check & EEPROM

If a single pixel fails, data is read from the EEPROM and rewritten to the replacement chip. After replacement, the brightness value is recalibrated to ensure full system uniformity. Initial calibration data is recorded and stored for lifetime consistency.

05
Multi-Cabinet Sizes

Standard 768×768mm cabinet using 384×192mm tiles. Also available in 576×192mm (192×192mm tiles) and 250×250mm tile formats. Custom sizes available. Enables end-users to achieve precise display dimensions for any installation environment.

06
Patented Honeycomb Tile

Super slim 62mm cabinet depth with a patented honeycomb tile design — rugged yet lightweight. Front-service magnetic tiles can be removed with speed and ease. Modules are interchangeable for either left or right side of a display. Click and rig installation — zero tools required.

/ Available Configurations

Select a pixel pitch

1.95mm
Pixel Pitch · Model VFI1.9LTXR COB Technology

Finest pitch in the Titan XR range. Close-range UHD viewing — corporate headquarters, broadcast studios and control rooms where pixel structure must be imperceptible.

Cabinet Resolution256 × 512 px
Module Resolution128 × 128 px
Brightness (avg)1,200 nit
Brightness (calibrated)1,500 nit
Refresh Rate>4,800Hz
Greyscale20-bit
LED TypeSMD 1010 True Black
Viewing Angle≥170° / 170°
2.6mm
Pixel Pitch · Model VFI2.6LTXR COB Technology

Mid-range pitch for airports, large shopping malls, exhibitions and financial institution environments. Ideal 3–7m viewing distances.

Cabinet Resolution192 × 384 px
Module Resolution96 × 96 px
Brightness (avg)1,200 nit
Brightness (calibrated)1,500 nit
Refresh Rate>4,800Hz
Greyscale20-bit
LED TypeSMD 1010 True Black
Viewing Angle≥170° / 170°
3.9mm
Pixel Pitch · Model VFI3.9LTXR COB / MIP Technology

Widest pitch in the range. Large-format displays in stadiums, transport hubs and major retail where viewing distances exceed 5m and brightness is the priority.

Cabinet Resolution128 × 256 px
Module Resolution64 × 64 px
Brightness (avg)1,200 nit
Brightness (calibrated)1,500 nit
Refresh Rate>4,800Hz
Greyscale20-bit
LED TypeSMD 1010 True Black
Viewing Angle≥170° / 170°
/ Image Quality
SEE THE DIFFERENCE.
Projector
Titan xr
BlackShadowMidtoneHighlightWhite
Conventional Projector
Pledco Titan XR Series
Black Diamond output
Projector output
Projector
Titan XR
← Drag →

PRODUCT RESOURCES AND SUPPORT

Full Specifications

Titan XR Series
complete specification.

Pixel Pitch & Technology
Available PitchesP1.95mm · P2.6mm · P3.9mm3 configurations
Model NumbersVFI1.9LTXR · VFI2.6LTXR · VFI3.9LTXR-
LED Type3-in-1 SMD 1010 True BlackAll pitches
Cabinet Resolution — P1.95mm256 × 512 pixels
Cabinet Resolution — P2.6mm192 × 384 pixels
Cabinet Resolution — P3.9mm 128 × 256 pixels
Module Resolution — P1.95mm128 × 128 pixels
Module Resolution — P2.6mm 96 × 96 pixels
Module Resolution — P3.9mm 64 × 64 pixels
Brightness & Contrast
Brightness (Average)1,200 nitAll pitches
Brightness (White Balance at 6500K after Calibration)1,500 nitAll pitches
Viewing Angle≥170° horizontal / 170° verticalAll pitches
Colour Temperature Range3,200K – 9,500K4 presets + 1 custom
Refresh & Signal
Refresh Rate>4,800HzMSB/LSB + cross-scanning
Greyscale20-bitHigh grey at low brightness
HD BroadcastCompatible — flicker-freeTelevision recording ready
Signal RedundancyFull dual-path data redundancyZero downtime
Power & Monitoring
Power SupplyDual independent PSU — hot-swappableDynamic load sharing
Input Voltage110 / 220VAC, 50–60HzUniversal input
Power Consumption (Max)450 W/m²-
Power Consumption (Avg)160 W/m²
Real-Time MonitoringTemp · Voltage · Power · DataAuto-adjust + alerts
Pixel MonitoringPer-pixel EEPROM detectionData retained on module
Colour Calibration
Colour StandardsREC709 · REC2020 · DCI P3 D65 (opt.)Factory calibrated
Calibration Data StorageStored on LED modulesLifetime consistency
Cabinet & Structure
cabinet Size (Standard)500 × 1000 × 62mmCustomisable options available
Standard Tile Size250 × 250mm-
Alt. Cabinet — 768×768mmTile: 384 × 192mm-
Alt. Cabinet — 576×192mmTile: 192 × 192mm
Weight16.4 kg per cabinet-
Cabinet Depth62mmSuper slim profile
Service AccessRear standard / Front optionalMagnetic front tiles
ConfigurationFixed · Rental · PerimeterAll from same product family
InstallationClick & rig — zero toolsInterchangeable L/R modules
Environmental & Compliance
Operating Temperature-20°C to +65°C-
Operating Humidity10% – 85%Non-condensing
Lifespan≥100,000 hoursMTBF: 25,000 hours
ISO CertificationISO 9001 / ISO 14001Factory certified

All specifications sourced from pledco.com and official Pledco Titan XR specification PDF. Contact a Pledco specialist for project-specific values.

/ Start a Conversation
Talk to Pledco Titan XR Specialist Request a Review Talk to Pledco Titan XR Specialist Request a Review

Submit your project requirements for expert product guidance. A Pledco engineer will respond with a recommended system and next steps.